|
Automatic Twin Pail Filling System Model APF-510
|
|
Description of Operation |
|
This system automatically positions and fills two containers simultaneously
if bungs or caps are previously removed. Pails are moved in pairs
into the system by a pneumatic indexer with a separator bar. Each
pair is pushed onto an indexing conveyor. When called for, the
conveyor drives forward until an
electronic eye recognizes two
new empty pails. The pail conveys to the fill station where it
is raised off the conveyor and signals the fill cycle to begin.
The automatic
tare
sets and both lances insert into the pail to the designated down
position. The slow fill cycle begins until the level of liquid
reaches the fill spout
then it shifts into fast fill speed. At the designated fill height,
the cycle shifts into dribble speed to top off the pails and minimize
foaming.
|
|
General Specifications - APF-510 |
|
- Subsurface or top fill, 3 speed for greater accuracy
- Automatic abort if lance is not aligned with bung opening
- Two product flow valves to control water hammering
- Two inch diameter product valves for faster flow rates
- Quick change 2" diameter lance
- Wetted parts are 316 stainless steel with Teflon seats & seals
- 250 lb capacity scale base with single load cell
- Fully welded structural steel frame
- Air operated drip collector and Teflon wiper ring
- Hood for fume collection
- NTEP approved weight meter & load cell
- NEMA 4 standard enclosure, others optional
- Microprocessor controller - 250 products menu
- RS-232 port for data acquisition and printer connection
- Alpha - Numeric operator keyboard
- Operator troubleshooting interface with prompts
|
|
|
Options & Accessories - APF-510 |
|
- Infeed & Outfeed conveyors
- Additional lance carriage
- Spare lance assembly
- Lance rack & flush station
- Kynar lance for corrosive product
- Sanitary lance assembly
- Sampling valve option
- Type X or Z purge or NEMA 7 enclosures
- Lance flush or clean-in-place assembly
- Automatic fume booth
- Automatic container grounding
- Nitrogen container purging system
|
| |
|
Additional Equipment Available |
|
- Semi-automatic pail filling systems
- Automatic drum & pail palletizers
- Roller, chain & belt conveyors
- Pallet dispensers & collectors
|
|
|
| Specialty Equipment |
1221 ADKINS, HOUSTON, TX 77055 (713) 467-1818 FAX: (713) 467-9130
(C) 1996..2006 |
|