This is a pair of semi-automatic, top-fill machines. There are two fillers in line, each with 2 Kynar lances and independent carriages, because the product is highly corrosive. The operator can fill up to 2 drums sequentially or progressively. This system requires empty drums to accumulate prior to the filling station. Bungs are removed and left on top of each drum prior to filling. A scale mounted powered conveyor drives each drum on & off the fill station. Full drums will convey to a palletizer, accumulate in-line or be picked-up by fork truck

• Three speed filling for greater accuracy
• Automatic abort if lance is not aligned with bung opening
• Two product flow valves to control water hammering
• Two inch diameter product valves for faster flow rates
• Quick change 2" diameter lance
• Wetted parts are plastic, valves and lances or stainless steel with Teflon seals dependings on the product being filled
• 1000 lb capacity scale base with four load cells
• Fully welded structural steel frame
• Air operated drip collector and Teflon wiper ring
• Hood for fume collection
• NTEP approved weight meter & load cells
• NEMA 4 standard enclosure, others optional
• Microprocessor controller - 250 products menu
• RS-232 port for optional data acquisition and printer connection
• Alpha - Numeric operator keyboard
• Operator troubleshooting interface with prompts
• Fills a 55 gal drum in 42 seconds w/water @ 110 gpm & 30 psi

• Infeed & Outfeed conveyors
• Additional lance carriage
• Spare lance assembly
• Lance rack & flush station
• Kynar lance for corrosive product
• Sampling valve option
• Type X or Z purge or NEMA 7 enclosures
• Lance flush or clean-in-place assembly
• Automatic fume booth
• Automatic container grounding
• Nitrogen container purging system

• Automatic drum & pail palletizers
• Pail filling systems
• Roller, chain & belt conveyors
• Pallet dispensers & collectors