|
Pail & Drum Fillers
Models DF-511 & SDF-512-511
 |
Model SDF-512
This "Bare Bones" top filling machine has an adjustable boom for filling 5 to 55 gallon open mouth containers. This is the filler to use for Low Volume, or Batching type of operation. It can be upgraded with a variety of options |
|
 |
Model SPF-512
This is the same top filling machine upgraded with options like a floor mounted controls stand, cable/winch boom height adjustment and gravity conveyors at the infeed and discharge ends |
|
Model SDF-5511
The same machine as above adapted for a variety of container sizes
|
|
|
 |
General
Specifications |
|
- Two inch diameter product valve for faster flow rates
- Wetted parts are 316 stainless steel with Teflon seats & seals
- 1000 lb capacity scale base with four load cells
- NTEP approved weight meter & load cell
- NEMA 12 standard enclosure, others optional
- Microprocessor controller
- RS-232 port for optional data acquisition and printer connection
- Fully welded structural steel frame
- Fills a 5 gal in 10 seconds with water @ 60 gpm & 30 psi
|
|
Options & Accessories |
|
- Automatic raise & lowering of fill lance for tight head containers
- Lance alignment & abort feature
- If no container is present, no fill commands
- On/Off foot valve at end of fill lance
- Auto tare of incoming container
- Slow and dribble fill speed shifting for accuracy
- Stainless steel construction for wash down
- Epoxy coated frames
- Cable/winch boom adjustment
- Hand crank boom height adjustment
- NEMA 4 stainless steel enclosures
- Vertical post for control panel
- Air operated drip pan
- Infeed & Outfeed conveyors
|
|
|
Additional Equipment Available |
|
- Automatic pail palletizers
- Semi-automatic drum filling systems
- Roller, chain & belt conveyors
- Pallet dispensers & collectors
|
|
|
| Specialty Equipment |
1221 ADKINS, HOUSTON, TX 77055 (713) 467-1818 FAX: (713) 467-9130
(C) 1996..2006 |
|
